Register with GEF for FREE to enjoy these great benefits! 

    • member only contests and raffles

    • sustainability program news and updates

    • significant discounts at GEF Institute

Note: If you have problems registering, contact This email address is being protected from spambots. You need JavaScript enabled to view it.

JOIN GEF NOW!

Taking a GEF Institute Course? Login by clicking here.

 

 

 

 

 

Join Us

Sign Up for GEF's National Green Week 2014!
Please note: Your privacy is very important to GEF. We do not share or sell any of your data.  It is with the sole purpose of providing you with relevant information that GEF will contact you.
Login/SignUp
11 ways to green school

autodesk-logo-rgb-color-logo-black-text-large


Free Design Software for Students!

Click here to download a free Autodesk license. Check out these great green design lessons:

Green Cabin Design
Contain It Housing
Bike Pavilion

Curriculum button_

Download GEF Institute's green building lessons and classroom supplements!

Large quantities of water are saved by the use of plumbing fixtures that are designed to operate with less water. For instance, toilets were once made to operate using 7 gallons per flush, but are now available using only 1.3 gallons (a savings of over 80%). Water-saving plumbing fixtures are required in many areas by building and plumbing codes.

There are several general approaches to the design of water-saving fixtures: low flow, dual-flush, waterless, and automatic sensor-type. Low-flow is the simplest and most common, including toilets, urinals, faucets and shower heads. Note that fixtures must be designed to operate correctly with less water – changing the valve on an older fixture will give unsatisfactory results.

flush-diagramDual-flush toilets are gaining in popularity, where the user can choose either of two flush modes depending on the use of the toilet. Waterless urinals have been developed and used, but they require special maintenance (a special liquid to be added) and are not very popular. Manufacturers have responded with ultra-low flow urinals that use as little as .125 gallons per flush (this compares to 1 gallon per flush for a “standard” type.

Automatic sensor-type faucets use very little water by limiting the flow rate as well as the time the fixture operates. Automatic operators are also used for toilets and urinals. In all cases, the sensors require electricity to operate. They may easily be wired to the building in new construction, or battery operated if added later. In the latter case, the batteries must be maintained. A new type of “self-generating” automatic valves have tiny water turbines inside that use the flow of the water to generate enough electricity for the next flush!

People generally do not like low-flow shower heads, but a range of “low-flow” is available, so a compromise can be reached between comfort and water savings. Low-flow shower heads and flow-restrictors on faucets are the simplest to install on existing plumbing – all it takes is a trip to the hardware store!